Debris Removal Out of Roofs plus High Rise Buildings : Your Cost-Effective Solution to Dumpsters.

Removing debris from tall structures and high-rise buildings safely, efficiently and cost-effectively is pretty challenging. While metal dumpsters may be ideal for disposing of ground level debris on construction sites, they’re way too heavy, cumbersome and bulky to be hoisted on rooftops or even to clear debris located several stories above ground.

Using chutes to slide debris on to a dumpster is not the best solution either for many reasons. First, maintaining chutes in good working order is labor intensive and requires frequent repairs as a result of friction, tearing, and damage that sharp objects and abrasive materials commonly within industrial debris could cause to the chute fabric because they slide down. In addition, dumping debris down a chute from an elevation generates plenty of airborne particles, dust and pollution that might present an important health hazard to workers and the general public.

Fortunately, you will find new special debris removal dumpster bags available on the market which are perfectly suited to this task and are well suited for the roofing and construction industry. These lightweight dumpster bags weigh under 10 lbs and measure roughly 36″ in width, length and height respectively. They are frame-less, self-standing and unlike other flexible dumpsters and traditional metal containers available on the market, they’re so light and compact, that they can easily be deployed by one individual in under 5 minutes on any rooftop, even on the tallest high rise buildings.

Despite their compact size, these reusable FIBCs (Flexible Intermediate Bulk Containers) can haul amazing quantities of debris from roof tops over and once again without falling apart odvoz suti. With a loading capacity of 2,200 lbs and a volume capacity of 27 cubic feet, they could hold virtually any type of abrasive or sharp material generated on a structure site, including jumbo sized debris such as for instance broken glass, torn metal, splintered wood, sheet-rock, cement chunks and much more. Because they are made from woven polypropylene, these dumpster bags are rip resistant and will not burst open even though the bags are punctured while being lowered to the ground by crane or while suspended in mid air. The straps that support these specialized FIBC bags are even tougher. They are designed to withstand 6,000 lbs of pressure and are manufactured from exactly the same kind of nylon material employed by car manufacturers for seat belts.

In addition, these special FIBC bags are equipped with a secure and easy to use dump bottom mechanism. Thus giving them an important edge when it comes to discharge rate. Once a case is filled up with debris and lowered to ground level, its contents could be quickly emptied right into a traditional dumpster or even a truck by simply releasing a couple of straps. This forces the underside of the bag to spread spacious and the contents to spill out whilst the crane lifts the bag back around the rooftop for another load.

These bags are fully customizable. Upon request producer can modify them to suit a customer’s specific needs. Including altering how big is bags in addition to how many straps for added support. Of course, the bags aren’t just helpful for removing debris from rooftops. They are also perfectly suited to removing debris at ground level, on steep inclines as well as below ground.

The maker of these specialized debris removal bags is offering a free sample bag with the purchase of three or even more bags, so if you should be starting a new construction, remodeling or renovation project and you need a cost-effective alternative to traditional metal dumpsters take full advantage of the free sample and compare how fast and efficiently you can clear debris from a niche site with your new and improved flexible dumpster bags.

Leave a reply

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>