LED Strip Lights offer several advantages over more traditional luminaires, such as for example incandescent, halogen and fluorescent. Many of these are intrinsic to LED-technology generally, like a longer life expectancy, while others are unique to LED Strips, such as for example flexibility. This article will outline a number of the advantages provided by these new generation strip lights.
Like all LED-technology, LED Strip Lights use considerably less electricity inside their operation. An average meter strip of LEDs will use about 7.2 watts in power, which works out to about 90% more efficient than other types of lighting. This makes them incredibly affordable to run and allows users to experiment with much larger installations with no concern with running up excessive utility bills. LED Trunking Light
LEDs can recreate a much wider selection of colours than traditional types of lighting, making them especially worthy of effects light installations. Along with the conventional warm white and cool white, which are used for ambience, LEDs also can create a wide spectral range of traditional colours.
LEDs have a life expectancy that far exceeds that of traditional luminaires. An average Strip Light can last as much as 70,000 hours.
Traditional luminaires tend to be housed inside glass enclosures, which are fragile and inflexible. In comparison, the LEDs on strip lights are mounted to a flexible “ribbon” of circuit board which may be bent around 90 degree corners and be made to fit to surfaces with a changing gradient.
These lights are generally considered a “linear” light source, because of their very long, thin design. This enables them to be fitted in locations that many other types of lighting can’t. Under kitchen cabinets, alcoves, shelves, bookcases; you name it, strip lights can get it done!
Halogen and incandescent light bulbs are notorious for becoming hot during use. LED Strips on another hand produce comparatively little heat, making them much safer to use and less of a fire hazard.
Mounting Strip Lights is surprisingly easy and requires hardly any expertise. Most strips have a 3M self-adhesive backing, allowing them to be stuck lower onto a floor without the necessity for mounts or brackets. Even when they don’t have a self-adhesive backing, installing brackets remains quite easy and much less hassle than installation a fluorescent tube, for example.
LED Strip Lights are one of many few types of lighting available that can be cut. They feature cutting points all along their length, which may be used to shorten or separate strips. Non-solder connections can be utilized for quick re-connection, or you can ask your retailer to do the job for you.